Chauvet DJ GigBAR MOVE + ILS User Manual page 21

Operation
Mode Programming Levels
RF
FOOT
SETUP
DFI
DFI CH
Pan1 Reverse
Tilt1 Reverse
Pan2 Reverse
Tilt2 Reverse
RESET
• The DMX value will display in white if not receiving the DMX signal, and will display in
yellow if receiving the DMX signal.
• The menu display will turn off if there is no operation within 60 seconds.
• In DMX mode, the fixture will save the last settings when the DMX signal was lost. When
in Master/Slave mode, it will blackout when the DMX signal is lost.
GigBAR MOVE + ILS User Manual Rev. 3
COMMON
BIND
OFF
RF Binding
COMMON
BIND
OFF
FOOT Binding
ON
OFF
1–16
ON
OFF
ON
OFF
ON
OFF
ON
OFF
NO
YES
Description
Enables control of the fixture using any RF remote
Enables control of the GigBAR MOVE + ILS using
only the RF remote paired to the fixture
Turns infrared off
Pairs an RF remote to a specific GigBAR MOVE + ILS
fixture
(Hold and press Blackout button on the RF remote)
Enables control of the fixture using any footswitch
Enables control of the GigBAR MOVE + ILS using
only the footswitch paired to the fixture
Turns footswitch control off
Pairs a footswitch to a specific GigBAR MOVE + ILS
fixture
(Hold and press Blackout pedal on the footswitch)
Enables DFI connection
Disables DFI connection
Selects DFI channel
Enables/disables Spot 1 pan reverse
Enables/disables Spot 1 tilt reverse
Enables/disables Spot 2 pan reverse
Enables/disables Spot 2 tilt reverse
Resets to factory defaults
Page 15