Table of Contents
Advertisement
User's Manual
•
•
•
3.3.15
AUTOPAN
Auto-pan refers to a PTZ camera rotating or scanning in a side-to-side motion to
view an area horizontally. The parameters can be set on this page.
•
35
Speed 6
Speed 7
Speed 8
Speed 9
Speed 10
Speed 11
Speed 12
Speed 13
Speed 14
Speed 15
DWELL TIME
The DWELL TIME is the duration for which the PTZ camera will remain at a
sequence point and has a range from <0> to <127> seconds. The PTZ
camera will move to the next sequence point when the DWELL TIME has
expired. If the setting is <0>, the PTZ camera will remain at the sequence
point until it is manually moved by the user.
RUN SEQUENCE
The user can command the PTZ camera to run the selected sequence line
manually.
EXIT
Select this option to exit the SEQUENCE menu.
AUTOPAN LINE
The PTZ camera has eight built-in sets of auto-pan lines. The user can select
a line to execute using the LEFT/RIGHT direction keys. The user can
command the PTZ camera to perform continuous panning with no time limit by
setting an identical start and end point.
65
75
185
205
225
250
280
320
365
400
AUTOPAN
AUTOPAN LINE
START POINT
END POINT
DIRECTION
SPEED
RUN AUTOPAN
EXIT
50
58
185
210
240
275
305
335
365
400
1
TO FIND
TO FIND
RIGHT
1
ENTER
YES
Advertisement
Table of Contents
