ZURN Serio Series Installation, Operation, Maintenance And Parts Manual

ZURN Serio Series Installation, Operation, Maintenance And Parts Manual

Sensor-operated lavatory soap dispensers

Advertisement

Quick Links

Serio
All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the
date of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are
notified in writing of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly
maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages
whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the
defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the
purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability
is expressly excluded. If the products sold hereunder are "consumer products," the implied warranty of merchantability is limited to a
period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are
approximate and are not guaranteed.
NOTICE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.
NOTE: The information in this manual is subject to change at any time without notice. Installations may be performed
at different times of construction by different individuals. For this reason, these instructions should be left on-site
with the facility or maintenance manager.
Zurn Industries, LLC
511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541
In Canada
|
Zurn Industries Limited
7900 Goreway Drive Unit 10, Brampton, Ontario L6T5W6 · Ph. 905-405-8272, Fax 905-405-1292
www.zurn.com
Z6950-SD
®
Series
LIMITED WARRANTY
TM
Serio Series
TM
Nachi Series
Sensor-Operated Lavatory
Soap Dispensers
Installation, Operation, Maintenance, and
Parts Manual
Z6957-SD
Nachi
Rev.
-
Date:
4/17/2017
C.N. No.
SAN007526
Prod. | Dwg. No.
®
Series
FV617

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Serio Series and is the answer not in the manual?

Questions and answers

Summary of Contents for ZURN Serio Series

  • Page 1 For this reason, these instructions should be left on-site with the facility or maintenance manager. Zurn Industries, LLC Rev. 511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541 Date: 4/17/2017 In Canada Zurn Industries Limited C.N.
  • Page 2 Soap Dispenser Package Contents Z6950-SD Z6957-SD Dispenser Assembly Mounting Hardware ® ® Serio Series Nachi Series Common Parts: Required Tools: Mounting Bracket Anchors Mounting Hardware Drill Bits Hand Drill -3/16” Control Screws Soap Bottle Phillips Head Pliers Screwdriver Specifications Power supply: AC110V ;...
  • Page 3 Z6950-SD Installation Overview The dispenser is mounted directly to the basin or counter top. The control box is mounted below the basin and the soap tube and sensor connector are run through the basin or counter. Spout Installation Feed the soap tube and sensor connector through the Ensure that the mounting adapter is oriented as mounting hole in the basin.
  • Page 4 Z6957-SD Installation Overview The dispenser is mounted directly to the wall above the basin. The control box is mounted below the basin and the soap tube and sensor connector are run through the wall behind the basin and back out the front of the wall to the control box below the basin.
  • Page 5 Control Box Installation Place the mounting bracket on the wall as a guide Align the tab on the back of the control box with the and mark the hole locations. Drill 3/16" holes on the mounting bracket hole and hang the control box. marks, insert the anchors, and attach the mounting bracket to the wall with the screws.
  • Page 6 Care and Cleaning Instructions: • Do not use any abrasive or chemical cleaners to clean the soap dispensers. • If abrasives or chemicals are used it can lead to dulling of luster, attacking of chrome plating or decorative finishes. • ONLY use mildly warm soapy water, and then wipe the device dry with a clean/soft towel or cloth.

This manual is also suitable for:

Nachi seriesZ6950-sdZ6957-sd

Table of Contents