Table of Contents
Advertisement
Registering the deskset to the base station
The deskset must be registered to the base station in order to make and receive
calls.
There are three methods of registration:
•
Auto registration
•
Manual registation (triggered via Web UI).
•
Manual registation (triggered via LINK button on base).
Registering the deskset - Auto registration
1.
Make sure the base station is connected to power and the network.
2. Press the Setting key OR the User Settings function key.
The User Settings screen appears.
3. Press
or
The Registration screen appears.
4. With This device selected, press OK.
The "This device" screen appears.
5. Press
or
The deskset displays:
Trying to auto-register...
Keep the deskset within base's range.
If registration is successful:
The deskset beeps and displays "Deskset X Registered" .
If registration fails:
The deskset displays "Registration failed". Press OK.
The deskset displays "Consult the phone administrator to provision the
device IPEI to the base." Press IPEI to display the phone's IPEI and serial
number. Give these numbers to your phone administrator.
to scroll down to Registration and press OK.
to scroll down to Auto Registration and press OK.
15
Advertisement
Table of Contents
