Replacing The Ac Motor - WAGNER ProSpray 20 Service Manual

Hide thumbs Also See for ProSpray 20:
Table of Contents

Advertisement

GB
3.8

REPLACING THE AC MOTOR

1. Ensure safe isolation from the supply before commencing work.
2. First disconnect the defective motor, noting the exact pin assignment.
3. Now replace the motor.
4. Observe the pin assignment noted in point 2 when connecting the individual wires.Also ensure secure contact when con-
necting the wires.
5. After completing the repair a measurement in accordance with BGV A3 must be carried out.
6. In order to exclude further use of the defective motor, all wires must be disconnected directly at the motor.
32
ProSpray 20

Advertisement

Table of Contents
loading

Table of Contents