Table of Contents
Advertisement
COMPUTER
FUNCTION BUTTON
PRESS TO SELECT FUNCTIONS PRESET, OR HOLD ON CAN BE
TOTAL RESET
FUNCTIONS
: WHEN STOP PEDALING, " STOP " DISPLAYS ON
STOP
LCD.
STEP/MIN
(
or
STRIDES/MIN):
STEP/MIN
(
or
STRIDES/MIN):
SCAN
:
Scan
Scan
each
each
function
function
SCAN
:
Determine
the
TIME:
Determine
the
TIME:
CALORIES:
Show
the
CALORIES:
Show
the
COUNT:
Accumulate
Accumulate
COUNT:
NOTE
1. WITHOUT ANY SIGNAL FOR A PERIOD OF 4 MINUTES, THE LCD DISPLAY WILL SHUT OFF
AUTOMATICALLY, AND ALL PREVIOUS WORKING VALUES ARE TOTAL RESET
2. WHEN THERE IS SINGAL IN, THE MONITOR IS AUTO POWER ON.
3. IF IMPROPER DISPLAY ON MONITER, PLEASE-INSTALL THE BATTERIES TO HAVE A
GOOD RESULT.
HOW TO REMOVE BATTERY
1. Pull out the computer from the equipment and place one SIZE-AAA battery into battery housing on back of
monitor, please refer to below illustrations.
2. Insure the battery is correctly positioned and battery springs are in proper contact with battery.
3. Then put the computer back into the original place and make sure it completely set down in position.
4. Battery life is approx. 1 year under normal usage.
5. If the display is illegible or only partial segments appear, remove batteries and wait 15 sec. before reinstalling.
6. Removing the batteries will erase computer memory.
7. If the step counter does not work, please carefully remove the computer and adjust the height of the
sensor manually,until the computer can display the number of steps.
WARNING: The battery is environmental, so the used battery should be thrown into the reference
dustbin.
Display
strides
Display
strides
in
in
sequence
sequence
length
of
workout
session
length
of
workout
session
calories
burned.
calories
burned.
the
the
number
number
of
of
stride
stride
during
during
in
every
minute
in
every
minute
workout
workout
session
session
4
Advertisement
Table of Contents
Need help?
Do you have a question about the A90-262 and is the answer not in the manual?