Read this first Getting started This booklet guides you on how to use and maintain your new wrist recceiver. Ensure you Pull the battery tab on the charger and connect the power supply to the mains outlet. read this booklet carefully, including the Warnings section. This will help you get the most The mains LED (8) lights up in green.
LED indications Using the bed shaker When the wrist receiver battery is nearly depleted, the battery LED (3) starts to blink in The BE1270 Bed shaker accessory wakes yellow. The charging time is up to 8 h. The charger is equipped with a battery backup and you with vibrations anything happens the charger LEDs indicate the following: while you are asleep.
General warnings local Bellman & Symfon office or the manufacturer. Visit bellman.com for contact info. Do not use the device in areas where electronic equipment is prohibited. This section contains important information about safety, handling and operating Without permission granted by the NCC, no company, enterprise or user is allowed to ...
ISO Certification of legal manufacturer in the user guide and this leaflet. If the product still doesn’t function as intended, contact your local hearing care professional for information on service and warranty. Bellman is certified in accordance with SS-EN ISO 9001 and SS-EN ISO 13485. Warranty conditions SS-EN ISO 9001 Certification Number: CN19/42071 SS-EN ISO 13485 Certification Number: CN19/42070...
Regulatory symbols Troubleshooting Most problems with the wrist receiver can be solved quickly by following the advice below. With this symbol, Bellman & Symfon confirms that the product meets the Medical Device Try this Regulation EU 2017/745. The receiver seems to ...
Need help?
Do you have a question about the BE8102 and is the answer not in the manual?
Questions and answers