Read this first Getting started This booklet guides you on how to use and maintain your new Portable receiver. Ensure you Slide open the battery cover, fit the batteries and close the cover again. read this booklet carefully, including the Warnings section. This will help you get the most Place the receiver on a level surface or mount it on the wall using the wall bracket.
Power LED indications General warnings The power LED (1) on the front of the flash receiver indicates what’s happening: This section contains important information about safety, handling and operating conditions. Keep this booklet for future use. If you are just installing the device, this Steady green light –...
This BE1450 Visit portable receiver can be configured with the following Visit transmitters lasts, so the above limitation may not apply to you. This guarantee is in addition to your and Bellman &...
Coverage is reduced if EEC, 93/42/EEC and 98/79/EC. walls and large objects block the signal. In the box BE1450 Visit portable receiver This symbol indicates that the user should consult the instructions for use. 4 1.5V LR14 batteries ...
Need help?
Do you have a question about the BE1450 and is the answer not in the manual?
Questions and answers