Advertisement
․
Select the attenuation ratio* and the vertical
deviation of the oscilloscope in accordance with the
conversion table below.
․
NB: The POWER light must come on.
Attenuation ratio
Voltage Input Range
(DC+AC Peak to PEAK)
[N.B]
The real vertical deviation in V/div is equal to the
attenuation factor multiplied by the range of vertical
deviation selected on the oscilloscope. It will be doubled
in the case of use of a 50 Ω load.
▉
Maintenance
For
maintenance,only
parts.The
responsible for any accident arising following a
repair made other than its after sales service or
approved repairs.
X1000
3000V
use
manufacturer
8
specified
can
not
be
X100
300V
spare
held
Advertisement
