Download Print this page

Version Control And Verification - FutureLogic GEN2 PSA-66-ST2 Instructions Manual

Firmware download utility

Advertisement

The self test ticket contains information similar to the following:
Note: The download process will not complete if any of these steps are not successful.
The result of a failed download process will be a printer with its memory flushed or
otherwise unable to boot successfully. Specifically, the printer will not be capable of
printing. If this occurs, repeat these steps. If not successful, follow your RMA procedure
for this printer.
12. Remove this printer.
13. Go back to step 2 and repeat this process until all printers have been loaded.
1.2.1

Version Control and Verification

The firmware version number will be printed on the ticket after the download is complete.
Verify that this matches the firmware version displayed on the screen.
© 2004 – 2005 FutureLogic, Incorporated. All Rights Reserved.
Model:
Firmware:
COMMUNICATION
Interface:
Baud Rate
Data Bits:
Parity:
Handshaking:
PRINT CONTROL:
Darkness Control: +00%
Black Bar Index: Enabled
Print On Demand: Disabled
Auto Sleep Timer:
SYSTEM RESOURCES
Templates:
Print Regions:
Graphics:
Fonts:
Figure 1-9
Firmware Download Utility Instructions
PSA-66-xxxx
STPV2.1.1 TKT-2.3
Serial
19,200
8
NONE
XON/OFF+HARDWARE
Off
1,2,3,4,5,6,7,8,9,A,B
1,2,3,4,5,6,7,8,h,9,A,B
C,D,E,F,G,I,J,K,L,N,O,P
Q,R,S,T,U,Z,X,a,b,c,d,e,
f,g,i,j,k,l,m,n,o,p,q
3(0), 1(0), 2(0), 4(0)
7(0), 8(0), 5(0)
Sample Self Test Ticket
PUBN Page 6 of 10 05/04/2005
PUBN-000027 REV.B

Advertisement

loading

This manual is also suitable for:

Gen2 psa-66-st2rGen2 psa-66-st2n