Download Print this page

Using The Download Utility - FutureLogic GEN2 PSA-66-ST2 Instructions Manual

Firmware download utility

Advertisement

1.2

Using the Download Utility

Verify that you have installed the FutureLogic, Inc. Download Utility. You can acquire this
software from the FutureLogic, Inc. Web site (http://www.futurelogic-inc.com) or CD-ROM.
Note: The main window of the Download Utility displays a tab marked Auto Download.
Additional tabs for each communications port you select on the Auto Download
Preferences dialog display as well.
When the Download Utility detects a printer connected to a communications port, the
tab for that port displays "Printer Found." If not printer is detected, the tab for that port
displays "??No Printer??".
To change the firmware on the GEN2 printer:
1. Access the Download Utility.
Toolbar
Buttons
Tabs
© 2004 – 2005 FutureLogic, Incorporated. All Rights Reserved.
Figure 1-2
Slide the Unit until It Locks
Figure 1-3
Download Utility – Main Window
Firmware Download Utility Instructions
PUBN Page 2 of 10 05/04/2005
PUBN-000027 REV.B

Advertisement

loading

This manual is also suitable for:

Gen2 psa-66-st2rGen2 psa-66-st2n