Settings - Westinghouse WWT6084J5WA User Manual

16 www.westinghouse.com.au / www.westinghouse.co.nz

3.5 Settings

Child Safety Lock (
Your appliance is provided with CHILD
SAFETY LOCK which permits you to leave
the appliance unsupervised with the door
closed without having to worry that children
might be injured by or cause damage to
the appliance.
Set this option AFTER pressing the
Start/Pause button.
To set "Child Lock" option:
To activate the function, press and
hold "Rinse" and "Spin" button about 3
seconds until the display shows the
icon "
–
If you press any button while
Child Lock is activated, the icon
"
3 times along with buzzer sound.
– All the buttons are locked.
You must deactivate the function
before operating the washing
machine.
To deactivate the function, press and
hold these two buttons again until the
display shows the icon "
Soak ( ) Option
This option allows you to soak heavily
soiled clothes at the beginning of the
wash. To do this, press the "Temp" and
"Rinse" buttons at the same time for about
3 seconds to add the soak phase.
The lid must be closed to allow Soak
functions to operate. The machine will
agitate for short periods. At other times,
the clothes are soaking and the machine
will be doing nothing.
) Option
".
" will flash on display
".
Enabling/Disabling End-Of-Wash
Buzzer
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when
the wash finishes approximately 1 hour
later, it will not disturb you through the
night.
Error warning beeps such as critical
faults are not disabled.
To disable the buzzer sound, press
"Water Level" and "Temp" buttons at
the same time about 3 seconds, the
icon " " will show on display
along with buzzer sound.
To return to default configuration press
these two buttons at the same time
about 3 seconds, the icon "
show on display along with buzzer
sound.
" will