Westinghouse WWT6084J5WA User Manual page 15

Note:
Compare this with Regular rinse where
much more water is used.
Regular rinse, water enters the
machine filling up to the wash water
level selected. The washer agitates and
finally empties the rinse water through
the drain hose.
Extra rinse, this is a special option for
those people who suffer from allergies,
this extra rinse will provide 2 rinses to
ensure all detergent residue has been
removed.
Select Regular rinse if you are going to
use fabric softener.
Regular rinse ensures the fabric
softener is correctly dispensed and
thoroughly removed from your clothes
during rinsing.
Spin Button
Press this button to select the spin speed or
no spin, if you want your laundry to be spun
at a speed different from the one proposed
by the washing machine.
The speed of spin level are:
– High, about 800 rpm ;
– Mid, about 650 rpm ;
– Low, about 550 rpm ;
– No Spin, 0 rpm.
Delay End (
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour to
maximum of 20 hours.
Press the Delay End button to choose the
end time as you wish. The display shows the
number of hours.
This option must be selected after
choosing the wash program, and before
pressing the "Start/Pause" button.
) Button
For example, if the program duration of
your selected program is 3.20 hours and
you define the "Delay End" time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
: 6 hrs.
2.40 hrs.
Countdown
Pressed Start the
Start/Pause Program
After selecting Delay End time, press
Start/Pause button to start the program.
Machine will then countdown and update
time on the display every hour until it
reaches the starting point of the wash
cycle.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
- set the washing machine to PAUSE by
pressing "Start/Pause" button;
-
deselect this option by pressing
"Delay End" button repeatedly till
the display shows delay time "
press the "Start/Pause" to start the
-
program.
Start/Pause Button
To start the selected program, press the
"Start/Pause" button.
If you have started your wash and you
wish to stop it for some reason, press the
"Start/Pause" button to enter PAUSE
mode
To restart the program from the point at
which it was interrupted, press the
"Start/Pause" again.
If the lid is opened during operation,
the machine will go into PAUSE
mode and display show "
After closing the lid press
Start/Pause button on the control
panel to restart the program.
15
3.20 hrs.
Program Cycle
End of
Cycle
";
".