Edwards & Co Avery Base Unit Use & Care Manual page 6

A VE R Y B A S E UN I T - USE + C A R E G U I DE
This product is designed to be installed using ISOFIX OR the vehicle seat
belt. NEVER use the product with the ISOFIX anchors and vehicle seat
belt together.
This product fits vehicles with positions approved with ISOFIX anchors,
depending on the category of the child seat and of the fixture.
When this product is used with your vehicle's 3-point seat belt, it
is ONLY SUITABLE for use in vehicles fitted with a 3-point static or
retractable seat belt that is approved to ECE Regulation No.16 or
equivalent standards.
If in doubt, contact the child restraint manufacturer or the retailer.
Capsule compatibility
This child restraint base is only compatible with
Edwards & Co capsule models FA0050, FA0053 and FA0062.
NEVER use this product with another capsule shell.
Correct use of the base unit
NEVER use this product without installing it securely into your vehicle.
NEVER alter or modify this product in any way. This can affect its
performance in the event of a collision.
DISCARD this product if it is involved in a serious collision EVEN if no
damage is visible.
Base unit expiry
Do not use this base unit if it is older than 7 years from the manufacture
date. The materials can weaken over time and the protection it provides
"Determining the base unit's expiry
in an accident may be reduced. See
date".
This child restraint should not be purchased or sold as a second hand
item unless you are sure about its history.
6