Table of Contents
Advertisement
AVER Y B ASE UNIT - U SE + CA R E G UI D E
Notes to ensure a safe installation using the vehicle belt.
Ensure the correct angle is achieved
When the capsule is clipped into the base unit,
it must sit at an angle which ensures your baby
can rest with their head back and their airways
open. This ensures maximum safety for your
"Using the level indicator"
baby. See
in your
Avery Capsule Use & Care Guide for more
information.
To achieve the correct angle, always check that
the base unit sits level on your vehicle seat.
When installing the base unit with the 3-point
seat belt, a tightly rolled towel can be used
under the base unit to adjust the angle. The
rolled towel is positioned under the end of the
base unit alongside the bottom of the vehicle
seat back.
Ensure the base unit is secure
Ensure the base unit is installed securely on
the vehicle seat. It is installed securely when
Hold at belt path
and tug side to side
it has little to no movement when tugged side
to side. This movement is checked at the belt
path, where the lap belt is threaded through
the base unit.
If the base unit does not feel secure, or does
not exactly match these instructions, it will
need to be reinstalled. Ensure there is enough
tension on the vehicle belt to result in a secure
installation.
Only once the base unit is secured with little to
no sideways movement (when checked at the
belt path) is it ready to use.
21
Advertisement
Table of Contents
