Siemens SIMATIC ET 200SP Manual page 24

Configuring/address space
4.1 Configuring
Additional information
A detailed description of the counting and measuring functions and their configuration is
available:
● In the Counting, Measurement and Position Input Function Manual available as download
● In the STEP 7 (TIA Portal) information system under "Using technology functions
A detailed description of the use of Motion Control and its configuration is available:
● In the S7-1500 Motion Control function manual available as a download from the Internet
● In the STEP 7 (TIA Portal) information system under "Using technology functions
Hardware Support Package
The Hardware Support Packages (HSP) are available for download from the Internet
(http://support.automation.siemens.com/WW/view/en/72341852).
Note
If you integrate the TM Count 1x24V via HSP in an S7-300/400 system, you can use the
"Isochronous mode" system function.
GSD file
The GSD files for the ET 200SP distributed I/O system are available for download from the
Internet (http://support.automation.siemens.com/WW/view/en/57138621).
24
on the Internet (http://support.automation.siemens.com/WW/view/en/59709820)
> Counting, measurement and position detection" > Counting, measurement and position
detection (S7-1500)"
(http://support.automation.siemens.com/WW/view/en/59381279)
> Motion Control > Motion Control (S7-1200, S7-1500)"
Technology Module TM Count 1x24V (6ES7138‑6AA00‑0BA0)
Manual, 10/2013, A5E33002339-AA