Table of Contents
Advertisement
On-screen Displays
Status display
Displays the current settings and operating status (such as
playback, pause) of this unit.
Pressing the [ON SCREEN] button on the remote control
displays the status. To cancel the display, press the [ON
SCREEN] button again.
You can select whether to display the statuses by changing
the settings in the settings menu.
For more details, refer to "Display" (A page 79) .
Memo:
• To display the statuses, set the ON SCREEN GUIDE item
on the DISPLAY menu screen to "AUTO".
• Setting the DISPLAY item to "OFF" hides display of all
status information.
Event display
An on-screen event display appears on the display window as
well as the monitor when there is a misoperation.
• The event display appears for an interval of about three
seconds.
Memo:
• The same event display may appear several times.
Alarm display
When an operation is not accepted by this unit, an on-screen
alarm display appears on the display of the main unit as well
as the monitor.
Discs
BD recording formats
BDAV mode
o
• Videos can be edited (chapter edit etc) and new videos can
be added to the disk. This format is suitable for recording
videos.
• MPEG2 with HD quality will be recorded as it is onto
the disc. This format has low playback compatibility, but
performs well when used for backups.
BDMV mode
o
• Compatible and playable on other BD players. Menu
functions similar to those of DVD video mode are also
included.
This format performs well for distribution purposes.
DVD recording formats
VR MODE
o
• Format the disc using "VR MODE" if you want to add new
videos to the disc.
• Deleting currently saved videos increases the remaining
space on the disc. (except for the case of DVD-R discs.)
VIDEO MODE
o
• Format the disc in this mode if you want to play the disc on
a different DVD player.
Formatting of discs
Formatting is required for some disc types. Perform formatting
if this is necessary.
When using BD-RE or BD-R discs
o
Formatting is required. Format the disc using this unit.
When using DVD-R discs
o
Formatting is required depending on the disc mode to be
used.
• Formatting is required when the disc is used in "VR MODE".
Format the disc using this unit.
• Formatting is not required when using the disc in "VIDEO
MODE".
Note:
• BD-R and DVD-R discs cannot be reformatted. Check the
disc mode before formatting the disc.
When using DVD-RW discs
o
Formatting is required. Format the disc using this unit.
• Format using "VR MODE" or "VIDEO MODE".
Getting Started
9
Advertisement
Table of Contents
