Table of Contents
Advertisement
Importing Data from an SD
Card to the HDD
Data can be imported from a SD (SDHC) card to the HDD as
follows.
• File formats that can be imported
AVCHD, SD-VIDEO, and JPEG
Memo:
• Titles that are imported using "FULL IMPORT" combined
into one title. This unit does not support combining of titles
during the editing operation after import is complete. To
combine and import data, select "FULL IMPORT".
• For data that is selected for import via "SEL.
TITLE(VIDEO)", titles with the same date are combined.
• Titles of two or more scenes cannot be combined if the
recording criteria, such as video size, are different.
Note:
• Do not remove the SD card when importing of the titles is in
progress or when the importing screen is displayed.
Doing so may result in loss or damage of the titles.
• Only titles that are not copyright-protected can be imported.
Preparations
o
1 Insert the SD (SDHC) card into the [SD SLOT]
Memo:
• "SD RDY" appears on the display window of the unit when
an SD card is recognized.
2 Press the [DUBBING] button on the remote
control unit
• The importing screen appears.
3 Select "SDhHDD" in the importing screen, and
press the [OK] button
• A check mark is added to the "SDhHDD" item.
4 Select "NEXT", and press the [OK] button
• The import selection screen appears.
Full import
1 Select "FULL IMPORT" in the import selection
screen, and press the [OK] button
• A check mark is added to the "FULL IMPORT" item.
2 Select "START", and press the [OK] button
• Importing of the titles starts.
• After titles are successfully imported, a "DUBBING IS
COMPLETED" message appears on the monitor.
Dubbing/Importing
35
Advertisement
Table of Contents
