Changing Playback Settings; Playback Settings Menu; Audio/Subtitle Settings; Playback Settings - Tascam BD-R2000 Owner's Manual

Playing Back
Changing Playback
Settings
Displaying the playback settings menu
1 Press the [PB MODE] button on the remote
control unit during the playback of a title
• The Settings Menu screen appears.
• The playback settings menu can only be displayed during
the playback of a title.
• Only settings that are supported by the current title being
played back can be changed in the playback settings
menu. Items displayed in gray cannot be set.

Playback Settings Menu

Audio/subtitle settings

Memo:
• "AUDIO/SUBTITLE" will be displayed only if they are
available in the video content. The setting value differs
depending on the content. Items that are not available in
the content cannot be set.
AUDIO LANGUAGE
o
CHANGE AUDIO OUTPUT
o
SIGNAL TYPE (BD-ROM)
o
• PRIMARY VIDEO
• PRIMARY AUDIO
• SECONDARY VIDEO
• CHANGE SECONDARY VIDEO
• SECONDARY AUDIO
• SECONDARY AUDIO LANGUAGE
SUBTITLE LANGUAGE
o
SUBTITLE STYLE
o
CHANGE ANGLE
o
56

Playback settings

REPEAT
o
The following items can be set.
Items are not displayed if they cannot be set.
Setting Values
OFF Turns off repeat.
TITLE Repeats playback of the currently played
title.
CHAPTER Repeats playback of the currently played
chapter.
TRACK Repeats playback of the currently played
track.
FOLDER Repeats playback within the currently
played folder.
ALL Repeats playback of the entire disc.
A-B Repeats playback of the section between
the specified starting and ending points.
Pressing the [OK] button specifies the
displayed scene as the starting point
(Point A). Pressing the [OK] button after
forwarding playback specifies the displayed
scene as the ending point (Point B).
CHANGE TITLE
o
You can change to a different title by entering the
corresponding numeric value. Any value that is larger than the
number of titles cannot be entered.
CHANGE CHAPTER
o
You can change to a different chapter by entering the
corresponding numeric value. Any value that is larger than the
number of chapters cannot be entered.
TIME JUMP
o
You can move to a specific playback position by entering a time.
This is not possible if the specified time is not valid.
SLIDESHOW INTERVAL
o
The following items can be set.
3SEC/5SEC/10SEC/20SEC/30SEC modes
SLIDESHOW EFFECTS
o
The following items can be set.
Setting Values
OFF Turns off slideshow effect.
ON Turns on slideshow effect. "Fade out"
and "Fade in" effects can be applied
when switching from one slide to another.
Description
Description