Table of Contents
Advertisement
Dubbing/Importing
Importing Data from a BD/
DVD to the HDD
(Continued)
7 Select "START", and press the [OK] button
• Importing of titles starts according to the sequence in the
created title list.
• After titles are successfully imported, a "DUBBING IS
COMPLETED" message appears on the monitor.
Note:
• "START" cannot be selected for the following cases.
• A title that cannot be dubbed has been selected
• HDD memory is insufficient
• The amount of titles in the HDD has reached the
maximum amount
• A dubbing title list has not been created
Importing DVD-VIDEO
When DVD-VIDEO is detected, a recording mode selection
screen appears.
Follow the steps below to import DVD-VIDEO to the HDD.
32
1 Select "RECORDING MODE", press the [OK]
button, and select "RECORDING MODE" from the
recording mode selection screen
• Select the "RECORDING MODE" option.
For more details, refer to "Recording Modes" (A page 28) .
2 Select "START", and press the [OK] button
• Importing of the titles starts.
• After titles are successfully imported, a "DUBBING IS
COMPLETED" message appears on the monitor.
Memo:
• If the first play setting of the DVD-video has been set to top
menu or other settings, the title will not playback.
If playback does not start, press the play button or playback
the DVD-Video.
Canceling importing
To cancel importing before it starts
o
• Select "CANCEL" from the menu, and press the [OK] button
to cancel importing of a title.
• Alternatively, you can press the [RETURN] button to cancel
importing and return to the initial screen.
To cancel importing while it is in progress
o
• Press the [OPTION] button to display the pop-up menu.
Select "CANCEL" from the pop-up menu and press the [OK]
button. Data will be written onto the disc up to the point
where import is cancelled.
• Importing will also be stopped when the [ o ] button is
pressed to stop playback.
Advertisement
Table of Contents
