Delete Scenes - Tascam BD-R2000 Owner's Manual

Editing
Memo:
• To cancel the dividing operation, select "CANCEL" and
press the [OK] button.
• Alternatively, you can press the [RETURN] button to cancel
the divide operation and return to the initial screen.
• The dividing edit screen can also be called up from the
Playback Navigation screen.
A Select the titles to divide, and press the [OPTION]
button
B Select "EDIT", and press the [OK] button
001 00
00 00
C Select "DIVIDE", and press the [OK] button
001 00
00 00
70
00 00
00 00
00 00
00 00

Delete Scenes

Unwanted scenes of a saved title can be deleted.
Doing so helps to increase the free space on the disc.
Memo:
• Deleting scenes can only be applied to titles stored on the
HDD.
• Titles that are protected cannot be deleted. To enable scene
delete of a title, turn off the protection.
For details on turning off the title protection, refer to "Turning
Off Title/Group Protection" (A page 64) .
• HD content for which the delete scene operation has been
applied cannot be dubbed to BDMV. Perform seamless
conversion before starting a dubbing operation.
For details, refer to "Mode conversion" (A page 73) .
Delete Scenes
1 Press the [EDIT] button on the remote control
unit
• The Edit menu screen appears.
2 Select "DELETE SCENE", and press the [OK]
button
• Displays the Title Display screen.
3 Select a title, and press the [OK] button
4 Edit the delete scene section
Follow the steps below to edit the section for which delete
scene is to be applied.