Importing Data From An I.link-Compatible Device To The Hdd - Tascam BD-R2000 Owner's Manual

Importing Data from an
i.LINK-compatible Device
to the HDD
Data on devices connected to the i.LINK terminal can be
imported to the HDD as follows.
• Video formats that can be imported:
DV and HDV content
Memo:
• Only titles that are not copyright-protected can be imported.
• Devices that have in-built copyright protection such as
D-VHS and digital tuners cannot be connected. This unit
only allows import from tape media.
• Importing will not be performed if no tape has been inserted
into the HDV/DV camera.
• Importing will be cancelled when the mode is changed from
HDV to DV or vice versa.
• For camcorders that support both HDV and DV recording,
use only one of the modes for recording and playback.
• There is no support for editing using a connected PC.
• Only one i.LINK device can be connected to this unit at a time.
• When importing DV contents with shooting date/time
information, the date/time information at the beginning
of the contents will be taken as the shooting date/time
information. For HDV contents or DV contents without
shooting date/time information, the importing date/time will
be taken as the shooting date/time information.
Note:
• Turn off the power for this unit and the connecting device
when connecting using an i.LINK compatible device.
• Do not unplug the i.LINK cable while importing to the HDD is in
progress. Doing so may result in loss or damage of the titles.
Preparations
o
1 Connect the device (camera, etc.) to this unit
using an i.LINK cable
Memo:
• After the device (camera, etc.) has been connected using
an i.Link cable, turn on the power of the device and switch
it to playback mode. (refer to the device's (camera, etc.)
instruction manual for more details.)
• "HDV/DV RDY" appears on the display window of the unit
when an iLINK device is recognized.
HDD REC BV REC SD
REC INPUT MIDIA SELECT ONE TOUCH
MODE SELECT HDD BD/SD DUBBING
HDV/DV IN
2 Press the [DUBBING] button on the remote
control unit
• The importing screen appears.
3 Select "HDV/DVhHDD" in the importing screen,
and press the [OK] button
• A check mark is added to the "HDV/DVhHDD" item.
4 Select "NEXT", and press the [OK] button
• The import selection screen appears.
Imports data from the beginning
You can import videos from the beginning till the end as
follows. If the current position is halfway through the tape,
import after rewinding the tape to the beginning.
1 Select "IMPORT FROM BEGINNING", and press
the [OK] button
• A check mark is added to the "IMPORT FROM
BEGINNING" item.
2 Select "NEXT", and press the [OK] button
• A recording mode selection screen appears.
3 Select "RECORDING MODE", press the [OK]
button, and select from the pop-up menu
Dubbing/Importing
37