Tascam BD-R2000 Owner's Manual page 26

Dubbing/Importing
Formatting (Continued)
5 Select "YES", and press the [OK] button in the
format confirmation screen
• Formatting starts.
• After formatting is complete, a "THE DISC HAS BEEN
FORMATTED" message appears on the monitor, and the
normal screen is displayed.
Memo:
• To return to the initial screen without formatting the disc,
select "DO NOT FORMAT" and press the [OK] button.
Alternatively, you can press the [RETURN] button to return
to the initial screen without formatting.
Note:
• Do not turn off the power or unplug the power cable when
the "FORMATTING DISC..." message is displayed.
• Note that formatting a disc with copyright-protected titles
erases all the titles from the disc.
26
Cancel formatting
o
Memo:
1 Press the [OPTION] button while formatting
2 Select "STOP" and press the [OK] button
• A confirmation screen to stop formatting appears.
3 Select "YES" on the confirmation screen and
press the [OK] button
• Formatting is stopped.
Note:
• Formatting can be stopped if it seems to take a long time
(more than two minutes).
• If for any reason formatting cannot be stopped, the
confirmation screen for stopping formatting will not appear
even if the [OPTION] button is pressed.