Subscribe to Our Youtube Channel
Related Manuals for Southern Enterprises 12877
Summary of Contents for Southern Enterprises 12877
- Page 1 MS333400TX – ESPRESSO LADDER MEDIA STAND For assistance with assembly, contact: Southern Enterprises Inc. customer service 1-800-633-5096 Assembly Instructions service@seidal.com www.seidal.com PO#12877...
- Page 2 LADDER MEDIA STAND Parts List Please review all parts and hardware before disposing of any packaging. Call customer service if missing hardware. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below.
- Page 3 Quantity Quantity of 1 of 1 top shelf panel medium shelf panel Quantity Quantity of 1 of 2 bottom shelf panel drawer front Quantity Quantity of 2 of 2 drawer left side panel drawer right side panel Quantity Quantity of 2 of 2 drawer back panel drawer bottom panel...
- Page 4 Quantity Quantity of 20 Of 20 cam bolt cam lock Quantity Quantity of 36 Of 4 Φ5/16”*1-3/16” Φ5/16”*1” wood dowel wood dowel Quantity Quantity of 10 Of 10 Φ1/4”*1” spring washer hexagon head bolt Quantity Quantity of 10 Of 1 allen wrench flat washer (10)
- Page 5 (15) (16) Quantity Quantity of 12 of 36 Φ5/32”*7/16” screw L bracket (17) (18) Quantity Quantity of 24 of 6 sticker cover wooden plug (19) (20) Quantity Quantity of 4 of 2 anti-tip bracket plastic strap (21) (22) Quantity Quantity of 2 of 2 Φ5/32”*9/16”...
- Page 6 LADDER MEDIA STAND Assembly Instructions Insert cam locks (2) into holes on top center panel (F). Screw cam bolts (1) into holes on shelf panel "Please do not over tighten cam bolts. (B). Please stop when you feel tight" Insert cam locks (2) into corresponding holes on panel (F).
- Page 7 Insert cam locks (2) into holes on pre-assembled unit. Screw cam bolts (1) into holes on top panel (A). Attach top panel (A) to right side panel (E), top center panel (F), and left side panel (D) by inserting wood dowels (3) and cam bolts (1) into corresponding holes until top panel (A) meets panels (E, F, D).
- Page 8 Insert wood dowel (4) into corresponding holes on bottom left post (I). Attach bottom left post (I) to left side panel (D) using hexagon head bolt (5), spring washer (6), and flat washer (7). Tighten with allen wrench (8) as shown on inset. Note: Make sure the angled end on bottom left post (I) is facing down.
- Page 9 Insert wood dowel (3) in corresponding holes on top shelf panel (M), medium shelf panel (N), and Attach top right post (L) to bottom shelf panel (O). top shelf panel (M), medium shelf panel (N), and bottom shelf panel (O) by using hexagon head bolt (5), spring washer (6), and flat washer (7).
- Page 10 Join drawer front (P) to drawer left side panel (Q) by using wood dowel (12) and screw (11), tighten with a phillips screwdriver. Join drawer back panel (S) to drawer left side panel (Q) using wood dowel (12) and screw (11), tighten with a phillips screwdriver.
- Page 11 Attach anti-tip bracket (19) to the back of top panel (A) with short screw (21). Tighten using phillips screwdriver. Mark two desired locations on wall. Drill two 3/16" holes on wall. Insert plastic anchors (22) into the 2 holes on wall as shown. (You will need a hammer).
- Page 12 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts.
- Page 13 This unit contains a permanent warning sticker cover located on underside of top shelf or inside drawer. Do not allow children under 16 years to move the cart. Model: MS333400TX Ladder Media Stand Southern Enterprises, Inc 600 Freeport Parkway, Suite 200 Coppell, Texas, 75019 Manufacture Date: 01/15/2014...
Need help?
Do you have a question about the 12877 and is the answer not in the manual?
Questions and answers