Starting The Dvr; Detecting Installed Hard Drive; Recovering Lost Data; Restore Recording Feature - Swann DVR4-Alert SW242-DAL User Manual

4.1 Detecting Installed Hard Drive

Checking HDD ......
MASTER...

4.2 Recovering Lost Data

RECOVER HDD?
04811-101735
(SELECT)YES/(MENU)NO

4.3 Restore Recording Feature

Power Error Detected
Restore Hard Disk (Master) OK
Restore REC Mode............ OK
Chapter 4: Starting the DVR
will boot-up and detect the installed hard
drive.
information. If no hard drive is detected,
check that the HDD is set to master and the
tray is locked.
however the DVR system will automatically
recover lost data after power is reconnected.
After connecting the power, the system
On the screen it will show the hard drive
A power failure can cause data to be lost,
If a power error occurs during
recording process, the system will
automatically resume recording after
power is reconnected.
- 4 -
User Manual