Stop Recording; Recording Time On Hard Drive - Swann DVR4-Alert SW242-DAL User Manual

1. Hard Drive Usage (Displayed as a percentage)
2. Recording symbol (channel is currently recording)
3. Camera Number
4. Record Mode (QUAD or EACH)
5. Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
6. HDD Info. ([M] Master Hard disk)
7. Record Schedule: (T) Time or Manual Record (M) Motion Detection (-) No
Recording
8. The date and time on the DVR

6.2 Stop Recording

Press [ Stop] button to stop recording. If you have already activated the
password protection, you will be prompted to input the password.

6.3 Recording Time on Hard Drive

System
NTSC
System
PAL
Estimated record time based on a 120GB Hard Drive (Quad Mode) in hours:
You can calculate and estimate record hours by below formula:
15 (Kbyte/frame) × 7 (frame/sec.) × 60 (sec.) x 60 (min.)
Estimated time would be 332 Hours.
Quality Frame Rate
HIGH 20 K Bytes
NORMAL 15 K Bytes
LOW 12 K Bytes
Quality Frame Rate
HIGH 20 K Bytes
NORMAL 15 K Bytes
LOW 12 K Bytes
120 (G Byte) × 1024 (M Byte) × 1024 (K Byte)
30
58
78
97
25
70
93
117
Divided by:
- 13 -
User Manual
15 7
117 251
155 332
194 416
12 6
146 291
194 388
243 485
1
1748
2330
2913
1
1748
2330
2913