Page 16
⑧ The first SATA cable port on the main board must be connected at all times. If a hard disk is not connected, this device may not operate normally. ⑨ ⑩ ⑪ ① ② ③ ④ ⑤ ⑥ ⑦ ⑧...
Page 27
※ Press “Menu” on the remote controller and use Left/Right/Up/Down button to select menu by pressing “OK” button. ( Left/Right : Top menu, Up/Down : Sub Menu ) ① ② ③ ④ ⑤ ⑥ ①...
Page 55
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑫ ⑪ ⑭ ⑬ ① Click this button or press “CANCEL” button on the remote controller to close the PTZ control window. ② Click this spin control to select PTZ camera. (1~4) ③...
Page 56
⑫ Click to delete specified preset number. ⑬ Click to start touring, which function traverse each preset position one by one according to dwell time. ⑭ Click to stop touring. Setting a new preset position Move camera position using direction button ⑤. Select the preset number to set using button ⑨.