Shoulder Anchor Height Adjuster; Seat Belt Inspection - Suzuki 2010 Kizashi Owner's Manual

BEFORE DRIVING
changed to "LOCK" (OFF) by pressing the
engine switch.
Front passenger's seat belt reminder (if
equipped)
The front passenger's seat belt reminder
will activate only when there is a passen-
ger sitting in the front seat. In some situa-
tions, however, such as when you place
heavy objects in the front seat, the seat
belt reminder can be activated as if there
were a passenger present. The front pas-
senger's seat belt reminder works in the
same manner as the driver's seat belt
reminder, except that it is not activated
until 10 seconds after the ignition mode is
changed to "ON" by pressing the engine
switch.
2-43

Shoulder Anchor Height Adjuster

Adjust the shoulder anchor height so that
the shoulder belt rides on the center of the
outside shoulder. To upward, slide the
anchor up. To downward, slide the anchor
down while down the lock lever. After
adjustment, make sure that the anchor is
securely locked.
WARNING
Be sure that the shoulder belt is posi-
tioned on the center of the outside
shoulder. The belt should be away
from your face and neck, but not fall-
ing off your shoulder. Misadjustment
of the belt could reduce the effective-
ness of the safety belt in a crash.

Seat Belt Inspection

EXAMPLE EXAMPLE
57L21045
Periodically inspect the seat belts to make
sure they work properly and are not dam-
aged. Check the webbing, buckles, latch
plates, retractors, anchorages and guide
loops. Replace any seat belts which do not
work properly or are damaged.
65D209S