Suzuki 2010 Kizashi Owner's Manual page 103

Odometer/Trip meter/Thermometer
When the engine switch is pressed to
change the ignition mode to "ON", the dis-
play (C) shows one of the following three
indications, trip meter A, trip meter B and
thermometer. Also, the display (D) shows
the odometer reading.
EXAMPLE
(f) Trip meter A
(g) Trip meter B
(h) Thermometer
(i) Odometer
To switch the display indication (C), pull the
TRIP switch (3) quickly.
Odometer
The odometer records the total distance
the vehicle has been driven.
Keep track of your odometer reading
and check the maintenance schedule
regularly for
Increased wear or damage to certain
parts can result from failure to per-
(f)
form required services at the proper
mileage intervals.
Trip meter
(g)
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use the trip meter A and trip meter
B independently.
(h)
To reset the trip meter to zero, pull and
(i)
hold the TRIP switch (3) for about 2 sec-
onds when the display shows the trip
meter.
57L21083
CAUTION
required services.
BEFORE DRIVING
Thermometer
The thermometer indicates the outside
temperature.
EXAMPLE
If the outside temperature nears freezing,
the message shown in the above illustra-
tion will appear on the display.
NOTE:
The outside temperature indication is not
the actual outside temperature when driv-
ing at low speed, or when stopped.
57L21084
2-84