Suzuki 2010 Kizashi Owner's Manual page 204

OTHER CONTROLS AND EQUIPMENT
• CDs or CD-ROMs carrying no mark (A)
cannot be used.
• Some discs previously recorded in CD-
R\CD-RW format may not be used.
• A CD is inserted with its label facing
upward.
• When there is a CD already loaded in
the unit, another CD cannot be loaded
at the same time. Do not use force when
inserting the CD into the CD insertion
slot.
• If a blank disc (non recorded CD-R) is
loaded in the unit, the disc will be
ejected.
5-25
• Never insert your finger or hand
into the CD insertion slot. Never
insert foreign objects.
(A)
• Never insert a CD with glue coming
out from adhesive tape or a rental
CD label or with a trace indicating
that adhesive tape or a rental CD
label has been removed. This may
cause the CD not to eject or result
in a malfunction.
Selecting a CD mode
Press the CD button (3).
Each time the button is pressed, the
source is switched as follows:
CD
Loading a CD
Insert a CD in the Insertion slot (1).
When a CD is loaded, play starts.
CAUTION
®
Bluetooth audio
Ejecting a CD
Press the Eject button (2).
If you left a CD ejected for a period of
about 15 seconds, it will be automatically
drawn inside the unit. (Auto reload func-
tion, only at ACC off)
The backup eject function:
This function allows you to eject a CD with
the ACC power turned off by pressing the
Eject button (2).
CAUTION
If you forcefully try to push an ejected
CD inside the unit before auto reload-
ing, the disc surface might be
scratched.
Eject completely before reloading.
Listening to a CD
When a CD is inserted, it is automatically
played back.
When a CD is already inside the unit,
press the CD button (3) to play back the
CD.