Suzuki 2010 Kizashi Owner's Manual page 44

BEFORE DRIVING
(1)
Sliding the multi-function control switch (1)
located on the outside of the driver's seat
forward or backward changes the fore-and-
aft position of the seat.
2-25
57L21030
• Lifting up the front end of the multi-func-
tion control switch causes the front part
of the seat to rise.
• Pushing down the front end of the switch
causes the front part of the seat to lower.
• Lifting up the rear end of the switch
causes the whole seat to rise and the
whole seat to move forward at the same
time.
• Pushing down the rear end of the switch
causes the whole seat to lower and the
whole seat to move backward at the
same time.
Adjusting seatbacks
All seatbacks should always be in an
upright position when driving, or seat
belt effectiveness may be reduced.
(1)
Seat belts are designed to offer maxi-
mum protection when seatbacks are
in the upright position.
57L21031
Tilt the reclining switch (2) forward or rear-
ward to adjust the angle of the seatback.
WARNING
(2)
57L21032