Using Pre-Code To Program Devices - Sunwave Tech. 3815 User Manual

SRC-38 SERIES User's Manual

Using Pre-Code to Program Devices

Follow these instructions to program a device using
preprogrammed codes.
Press or
Manually Selecting the Code
1. Turn on the device you want
to program the SRC-
3810/3815 to control.
2. Select the device (for
example TV).
3. Check the preprogrammed
code list that was bundled
with the SRC-3810/3815 for
the four-digit code number
of your device. If no code is
displayed, that means this
device has no pre-code.
4. Enter the four-digit code
number and press
confirm the entry.
Note: If the code only has
one digit (for example, 0001),
you do not have to input the
preceding zeros; in this
example, press '1'.
5. Press the POWER button
test the code. The device
you are trying to control
should turn on (or off) as you
press this button. If not, return
to Step 2 and try another
code.
You can also press
four-digit code number.
18
to select PRE-CODE，and then press OK.
to
to
or to increase or decrease the