Appendix B - Accessories
SLC–2080
USB cable
The SLC–2080 is an optional link cable that enables
transmission of system setup to a personal computer or
another SRC-3810/3815.
With th
RemoteComm software enables user to
e
customize the remote control, create macros and timers.
With the Upgrade Tools enables user to upgrade program
and Preprogrammed code.
Upgrade Memory: Memory include Preprogrammed
●
code & User's setup data. When you upgrade all
flash memory the Preprogrammed code will be
renew and user's setup will be replace into factory
defaults.
Upgrade Preprogrammed code: Code Library only.
●
Upgrade MCU: MCU Program only.
●
Please refer to the SLC-2080 user manual for more
information.
Using Transmit wire to connect two SRC-3810 or 3815.
Select the TRANS in the set up menus to transfer flash
memory data (all data which setup by user) and
Preprogrammed code.
47
Transmit wire