Chapter 2 - Getting Started; Installing Ir-Extender; Installing Batteries; Battery Indicator - Sunwave Tech. 3815 User Manual

Chapter 2 - Getting Started

This chapter provides you with the information to
quickly get using the SRC-3810/3815.

Installing IR-extender

1. Plug in AC adapter into AC adapter jack on IR-extender
and into AC wall outlet.
2. Set address code.
3. Position IR-extender so that it is aimed at equipment.
Use IR blaster cable for equipment out of directional
range.

Installing Batteries

The SRC-3810/3815 operates on four AAA Alkaline
batteries (not included). Batteries must be inserted
before you can operate the SRC-3810/3815.
1. Turn the remote over, push the tab in the direction of
the arrow on the battery cover and slide the cover
off.
2. Insert the batteries, matching the batteries to the (+)
and (–) marks inside the battery case.
3. Snap the battery cover back into place.

Battery Indicator

A battery icon is displayed in the upper right-hand
corner near the time display:
5