Table of Contents
Advertisement
Operating your Scooter
Freewheel mechanism
A freewheel device disengages the power drive to allow manual operation
(Photo 26).
The freewheel is selected by pushing down the lever which is located at the
rear of the scooter. Once freewheel has been selected, the electronic drive
control system is disabled to prevent driving. This is a safety feature to
prevent you driving the scooter with the parking brake disengaged.
To turn off the freewheel and engage the motor, simply push the lever
upwards, (Photo 27).
Note: Use extreme caution in the freewheel mode, especially on
slopes/inclines. Letting go of your scooter whilst it is in
freewheel, can cause the scooter to roll unexpectedly.
This could cause damage or bodily harm.
Caution!
It is advisable that during the first few sessions of operating your scooter
that the area around you is clear of obstacles and pedestrians.
Before operating your scooter, ensure the seat height and position has
been adjusted to your satisfaction and the tiller angle has been set for
optimum safety and comfort.
Please see the "General Warnings", "Getting on Your Scooter" and "Tiller
Adjustment" sections earlier in this handbook.
Disengaging
Freewheel lever
Photo 26
Photo 27
20
Engaging
Freewheel lever
Iss 4
Advertisement
Table of Contents
