Page 1
Drawer Slide 1023 Back Panel Drawer Stretcher 4005 Panel has notched edge on both sides. Panel has pre-drilled holes on both sides. Bottom Panel Top Panel Side Panel Center Panel Foot MODULICIOUS 4 rev02 - PAGE 1 OF 7 WWW.BLUDOT.COM...
Page 2
HOW TO USE CAM LOCK HARDWARE Turn cam clockwise Note direction of Note direction of ½ turn arrow on cam arrow on cam MODULICIOUS 4 rev02 - PAGE 2 OF 7 WWW.BLUDOT.COM...
Page 3
ASSEMBLE ON CARPET OR PROTECTIVE MAT Finished edge Finished edge See page 2: HOW TO USE CAM LOCK HARDWARE 5001 5002 4005 5001 5002 MODULICIOUS 4 rev02 - PAGE 3 OF 7 WWW.BLUDOT.COM...
Page 4
REPEAT THIS STEP FOR SECOND SIDE PANEL Center panel Make sure notched edge and drawer slides are in Start screw alignment. here first. 5002 5001 5005 5002 MODULICIOUS 4 rev02 - PAGE 4 OF 7 WWW.BLUDOT.COM...
Page 5
Make sure back panels fit into top Add 2 rubber and bottom panel grommets to each notched grooves. back panel 5001 5005 5002 8018 MODULICIOUS 4 rev02 - PAGE 5 OF 7 WWW.BLUDOT.COM...
Page 6
3/32” drill bit. 3009 8043 1201 included 3009 MODULICIOUS 4 rev02 - PAGE 6 OF 7 WWW.BLUDOT.COM...
Page 7
Loosen the acorn nuts, shift the drawer front into place and ask a friend to hold the drawer front in place while you re-tighten the nuts (but don’t over tighten). MODULICIOUS 4 rev02 - PAGE 7 OF 7 WWW.BLUDOT.COM...
Need help?
Do you have a question about the MODULICIOUS 4 and is the answer not in the manual?
Questions and answers