Summary of Contents for BluDot MODULICIOUS 6 LOW DRESSER
Page 1
8018 Back Panel Drawer Stretcher 4015 panel has notched edge on both sides panel has pre-drilled holes on both sides Bottom Panel Top Panel Side Panel Partition Panel Foot MODULICIOUS 6 LOW DRESSER rev03 - PAGE 1 OF 6 WWW.BLUDOT.COM...
Page 2
HOW TO USE CAM LOCK HARDWARE Turn cam clockwise Note direction of Note direction of ½ turn arrow on cam arrow on cam MODULICIOUS 6 LOW DRESSER rev03 - PAGE 2 OF 6 WWW.BLUDOT.COM...
Page 3
ASSEMBLE ON CARPET OR PROTECTIVE MAT Finished edge Finished edge See page 2: HOW TO USE CAM LOCK HARDWARE 5001 5002 4015 4005 5001 5002 MODULICIOUS 6 LOW DRESSER rev03 - PAGE 3 OF 6 WWW.BLUDOT.COM...
Page 4
Make sure notched edges are at the rear First screw goes here Panels will have a smaller distance from drawer slide to bottom edge 5002 5001 5005 5002 as shown. MODULICIOUS 6 LOW DRESSER rev03 - PAGE 4 OF 6 WWW.BLUDOT.COM...
Page 6
Loosen the acorn nuts, shift the drawer front into place and ask a friend to hold the drawer front in place while you re-tighten the nuts (but don’t over tighten) MODULICIOUS 6 LOW DRESSER rev03 - PAGE 6 OF 6 WWW.BLUDOT.COM...
Need help?
Do you have a question about the MODULICIOUS 6 LOW DRESSER and is the answer not in the manual?
Questions and answers