Power Saving Function; Measuring And Display - Cateye CC-AT100 Instruction Manual

Fig.24
AT
AT
AT

3. Power Saving Function

When the main unit is left without receiving any signal for about 5 minutes continuously, power
supply is shut down and the unit will be in "sleep" state displaying only the clock time (Fig. 24). By
receiving a signal from the wheel, or by pressing the S/S button or the Mode button for over one
second, the unit "wakes up" and the display returns.
• When the Auto function is on (
released by riding the bicycle.
• When the power saving function is on, the data of trip altitude gain is not updated.
• When the power saving function starts, the unit automatically memorizes the data of the total
distance, total altitude gain and wheel circumference of that moment.

MEASURING AND DISPLAY

S Current Speed
Always displayed on the main display and updated once a second.
0.0(2.6) - 105.9 km/h [0.0(1.6) - 62.9 mile/h]
Current Altitude (Above Sea Level) (Main Mode)
Displayed on the sub display, in the 1 meter increment. In the scale of "feet", the increment is 5 feet.
–350 - 5800 m [–1050 - 17400 feet]
T Elapsed Time (Main Mode)
Displays the time from the start to the current point on the sub display, in the units of hours, minutes
and seconds. With the Reset operation, it returns to zero.
0:00'00" - 9:59'59"
symbol is on), the power saving function will be automatically
AT
E
13