Table of Contents
Advertisement
> Connect the battery
> 2 start-up modes
1 short press on the trigger = ON
1 short press on the trigger = OFF
1 long press on the trigger = ON
Release the trigger = OFF
16
> First power up & Exit from standby mode
2 short presses on the trigger ON
2 2
Speed adjustment
10 speed settings configurable
> When powering on
> Required speed is selected using successive short trigger presses.
There are 10 available speed settings.
Short presses to access the ten settings (1 press = 1 setting )
> Validate the required speed and exit adjustment mode by pressing the trigger until the
machine stops.
Press until the machine stops to validate.
The machine is ready to run, the speed will be memorised until the next adjustment. The
machine is fitted with an electronic protection. Whenever the comb encounters too much
resistance, the electronics cut the motor.
> To switch to speed adjustment mode, press
the trigger until the machine starts
17
Advertisement
Table of Contents
