Advertisement
If you are unable to find the cause of a problem, try resetting the evaluation board by using the
reset button on the board. Then restart the C-SPY Debugger in the IAR Embedded Workbench
IDE. You can also try disconnecting and reconnecting the power to the evaluation board, pressing
the reset button and then restarting C-SPY.
Information given in this document is intended as a help for the user. IAR Systems shall not be
held liable for any losses or problems arising from using the information given in this document.
IAR KickStart Kit content
Welcome letter
R-IN32M4-CL3 evaluation board
I-jet Lite incl. USB-micro cable
USB-micro B cable
GS-RIN32M4-CL3
Troubleshooting
Disclaimer
Trademarks etc.
IAR Systems, IAR Embedded Workbench, C-SPY,
visualSTATE, IAR KickStart Kit, I-jet, IAR and the
IAR Systems logotype are trademarks or registered
trademarks owned by IAR Systems AB.
All other trademarks or registered trademarks
mentioned in this document are the properties of their
© Copyright 2020 IAR Systems AB
Part number: GS-RIN32M4-CL3-IL
First edition: October 2020
respective owners.
7
Advertisement
