Renesas IAR KickStart Kit R-IN32M4-CL3 Getting Started Manual page 4

Run example application
1. We assume that you have some working knowledge of the IAR Embedded Workbench IDE. For a
quick introduction, see the documents and tutorials under Product explorer
Figure 2- IAR Information Center for ARM
2. From the Start menu, start the IAR Embedded Workbench IDE by choosing All Programs> IAR
Systems> IAR Embedded Workbench for ARM x.xx >IAR Embedded Workbench. You will
get straight into the IAR Information Center for ARM.
3.
You can download the example projects from the web site of Renesas Electronics:
https://www.renesas.com/eu/en/products/factory-automation/r-in32m4-cl3.html#sampleCodes
Note: To use the example projects, you need to register "My Renesas". and you need to prepare CC-Link
IE TSN (Master) MELSEC iQ-R. Please refer to the user manual comes with the Renesas Electronics
example project.z
4. Click the link "Project" for "IAR EWARM / ICC ARM".
5. Select RIN32M4-CL3-CCTSN-samplesoft\Software\CCLinkIE_TSN\project\IAR\main.eww to
launch IAR Embedded Workbench
6.
main.eww is loaded. Choose the RamDebug build configuration
Figure 3– Build configuration
GS-RIN32M4-CL3 4