Advertisement
Install IAR Embedded Workbench for ARM
1 Download the software and documentation for the R-IN32M4-CL3 Starter Kit board from
http://www.iar.com/kit_updates.
2 Run the software installation
3 Click Install IAR Embedded Workbench® for ARM and follow the prompt instructions to
install the product. We recommend that you use the default directories on your installation.
4 When you start IAR Embedded Workbench for the first time, the License Wizard will open
unless you already have an activated valid license. Choose
get an evaluation license
Figure 1 - Register to get an evaluation license
5 Click Register, choose a time or code size limited evaluation license, and then register to get your
license number, which will be delivered to you via e-mail within a few minutes.
6 Activate the license in the License Wizard window.
You may register both the time or code size limited evaluation licenses, active and switch in
between from the License Manager. For more information, see the IAR Embedded Workbench,
Licensing Guide, under
For the latest all software and documentation, please visit www.iar.com/kit_updates.
Getting started - Set up the evaluation board
Connect your computer and the I-jet Lite debug probe using the USB-micro cable (packing with
1
the I-jet Lite). Do not connect the I-jet Lite to the evaluation board yet.
The "USB" LED on the front side of the I-jet Lite will be lit with green when Windows
completes searching for a USB driver.
Connect the I-jet Lite to the JTAG/SWD/ETM Trace connector.
2
Connect your computer and USB-micro B connector for power supply on board using the USB-
3
micro cable.
GS-RIN32M4-CL3
.exe
file, it may take a while for the installation files to unpack.
(the internet access is needed).
\IAR Systems\Embedded Workbench x.0\common\doc
Register with IAR Systems to
.
3
Advertisement
