EK Loop Vertical GPU Holder EVO Gen4 Riser Installation Manual page 12

Ф 3 mm
(M3x20)
MOTHERBOARD
SCREWS
7 mm
CHECK FOR THREAD!
M3 OR UNC 6-32
STANDOFF SPACER
STEP 6
STEP 6
Remove the two screws from the bottom right side of the
motherboard (or just the one in the middle if you will use Bracket 4
instead of Bracket 3).
Compare one of the removed screws with both of the Standoff
spacers from the package to determine which has the same thread
Ф 3.4 mm
(UNC 6-32 x 3/4")
(M3 or UNC 6-32).
8 mm
Attach the correct Standoff spacer (or two spacers) through the
motherboard to the PC case.
- 12 -