Table of Contents
Advertisement
Available languages
Available languages
Maintenance
Cleaning
Left to Right Belt Travel
Right to Left Belt Travel
Figure 27
M4603
M4602
M4601
M6869
M6869
M4603
M4602
M4601
Every 12 Months:
A factory authorized service person should:
1. Open and clean the inside of the control panel.
2. Check and tighten all electrical connections.
3. Check DC gear motor brushes for wear.
4. Check conveyor drive chain for cleanliness
and proper lubrication.
If maintenance is required contact your local ser-
vice company, a factory representative or the
Blodgett Oven company.
WARNING!!
Always disconnect the power supply be-
fore cleaning or servicing the oven.
WARNING!!
If the oven needs to be moved, the gas
must be turned off and disconnected from
the unit before removing the restraint. Re-
connect the restraint after the oven has
been returned to its original location.
22
Advertisement
Table of Contents
