Hdmi Connector Cn301 - HP V241ib Maintenance And Service Manual

VGA (D-Sub) connector repairing
2) Lift the CN201 connector from the circuit board.
3) Place the new component on the circuit board. Be sure that it matches the footprint.
4) Solder the new component.

HDMI connector CN301

Repair the HDMI connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
HDMI connector repairing
2) Use a hot air gun to melt the solder on the pins.
HDMI connector repairing
15