HP V240a Disassembly Instructions
HP V240a Disassembly Instructions

HP V240a Disassembly Instructions

23.8-in monitor

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP V240a 23.8-in Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
2
0
0
1
0
8
0
3
0
0
0
0
0
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V240a and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HP V240a

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Tool Description Tool Size (if applicable) Description #1 Screw driver of "+" type Description #2 Hexagonal nut screw driver for DVI and D-SUB connector Description #3 Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: Lay the monitor on a flat, soft and clean surface.
  • Page 3 9. Mechanical Instructions Step Figure Description Press the button at the Remove the Stand bottom of the Stand and pull out the Stand. Unlock the screw. Use tool to remove the REAR_COVER Remove the REAR_COVER Disconnect the cable on the keyboard.
  • Page 4 Tear out all tapes. Remove the Separate the screws and MAINFRAME disconnect the and PANEL connectors to separate the MAINFRAME and PANEL. Remove the Remove the screws to MAIN BOARD remove the MAIN BOARD...
  • Page 5 Bezel and Bezel and Panel Panel...

Table of Contents