Power Board - HP V241ib Maintenance And Service Manual

6) Disassemble 5 screws from the board.
Remove the screws from the PCBA
7) Disassemble all the boards from housing and disconnect all the wires from the board.

Power board

The power board part number is 790TK1400M00R01.
Before removing the power board, follow these steps:
Prepare the monitor for disassembly. See Preparation for disassembly on page 10.
▲
Remove the power board:
1) The HP V241ib power board connector position is as follows:
12
Remove the VGA screws
Separate the PCBA from chassis