Table of Contents
Advertisement
HDMI connector CN301
Repair the HDMI connector:
1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move the CN301 out of the through holes.
Take off HDMI connector
2) Lift the CN301 connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.
V19
The connectors identifiers are as follows:
Connector
VGA Port
Connector location of Mainboard
Before repairing connectors, follow these steps:
Prepare the monitor for disassembly. See Preparation for disassembly on page 14.
▲
Location
CN201
21
Advertisement
Table of Contents
