Download Print this page

HP V202b Disassembly Instructions Manual

19.5-inch monitor

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP V202b 19.5-inch Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
3
0
0
1
0
0
0
2
0
0
0
0
0
Page
1

Advertisement

loading

Summary of Contents for HP V202b

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 Disassembly Flowchart for HP V202b Model Date: 2016.05.19 Initiator: Lulu Liu Action Tool Photo Assembly whole set Lay the Monitor on the desk, Separate base Unlock the 2 screws which fix Crossing Screw the chassis Driver Take out the bezel with hand...
  • Page 4 Take out the keypad PCBA with HAND hand Take out the backcover with HAND hand. Unlock the 4 screws which fix Crossing Screw the hinge and bucket Driver Unlock the 3 screws which fix Crossing Screw the arm and hinge Driver...
  • Page 5 Take out theTape and Foil with HAND hand. Take out the LED light conector HAND Take out the LVDS conector HAND Separate chassis assembly and HAND panel Take out the Mylar from chassis HAND...
  • Page 6 Unlock the 2 screws which fix Screw Driver the IF board to the chassis Unlock the 5 screws which fix Crossing Screw the IF & Power PCBA Driver...