Waste Disposal And Recycling; Dismantling The Motor; Normal Carbon Steel - ABB AMXE132 Motors Instructions Manual

Hide thumbs Also See for AMXE132 Motors:

Table of Contents

WAsTE dIsposAl And rECyClIng

2. Waste disposal and recycling

This instruction concerns the disposal and recycling of AMXE132 and AMXE200. The motors are designed

in such a way that it is easy to separate different components and types of material from each other,

making it easier to recycle.

NOTE: The methods are described in a very general way. All instructions are to be performed by

Dismantling the motor is done by simply separating all the components of the motor. Since the motor

mainly is assembled with screws and nuts, it is rather simple to carry out the dismantling. When the

motor has been dismantled into its different components, the different components have to be

separated and grouped together depending on material types.

The following components are separated into one group for normal carbon steel:

1. Bearing cover

2. Locking nut

3. Bearings

4. Connection box cover/rear cover

5. Connection flange (AMXE200)

6. Rotor shaft

7. Stator end plates (support plates)

8. Motor feet

9. Retaining ring

10. Spring washer

11. Screws and bolts etc.

personnel who are trained and skilled for the procedure.

Warning - Heavy Components

Risk of personal injury when dismantling the motor. Only skilled

and trained personnel should carry out dismantling.

Table of Contents

Amxe200 motors